Suppliers with verified business licenses
Audited Supplier | Model | ZZ5707S3640AJ | |
| Engine | Make: SINOTRUK | |
| Engine model: Euro II emission standard CNHTC Engine | ||
| 4 stroke direct injection diesel engine 6 cylinder in-line with water cooling, turbo-charging & intercooling |
||
| Maximum output: 371hp(273Kw) at 2200 rpm according to DIN | ||
| Maximum torque: 1350Nm at 1100~1600 rpm | ||
| Bore: 126mm; Stroke: 130mm; Displacement: 9.726L; Compression ratio: 17:1 | ||
| Specific fuel consumption: 195g/kwh; Engine oil filling quantity: 23L | ||
| Cooling system filling quantity (long-term filling): 40L | ||
| Thermostat opening temperature: 80oC | ||
| Twin cylinder air compressor Rigid fan | ||
| Option: Thermostat with 71oC opening begin Visco fan | ||
| Clutch | Single- plate dry coil-spring clutch, diameter 430mm, hydraulically operating with air assistance | |
| Transmission | Transmission, model HW19712, synchromesh, 10 forward and 2 reverse | |
| Ratio: 14.28; 10.62; 7.87; 5.88; 4.38; 3.27; 2.43; 1.8; 1.34; 1 | ||
| Propeller Shaft | Double universal joint propeller shaft with gear-shaped coupling flange | |
| Front Axle | HF12; Steering with double T-cross section | |
| Rear Axles | AC26; Casted axle housing, central single reduction with planetary wheel reduction (hub reduction), and differential locks between wheels and axles | |
| Ratio: 10.47 | ||
| Chassis | Frame: U-profile parallel ladder type with section of 300×80×8 mm, all cold riveted cross members and reinforced sub frame | |
| Front suspension: 10 semi-elliptic leaf springs with hydraulic telescopic double-action shock absorbers and stabilizer | ||
| Rear suspension: 12 semi-elliptic leaf springs with bogie spring and stabilizer With one spare wheel |
||
| Fuel tank: with 300 L fuel tank with locking fuel cap | ||
| Steering | ZF8118, hydraulic steering with power assistance | |
| Ratio: 22.2-26.2:1 | ||
| Brakes | Service brake: dual circuit compressed air brake | |
| Parking Brake (emergency brake): spring energy, compressed air operating on rear wheels | ||
| Auxiliary brake: engine exhaust brake | ||
| Option: ABS | ||
| Wheel & Types | Rims: 10.2-25 10 hole-steel | |
| Types: 14.00-25 tube | ||
| Option: 14.00R-25 | ||
| Driver's cab | HW7D cab, all steel forward control, 55o hydraulically tillable to the front, 2-arm windscreen wiper system with 3 speeds, laminate windscreen, with casted-in radio aerial, hydraulically damped adjustable driver's seat and rigid adjustable co-driver's seat, heating & ventilation system, with stereo radio/cassette recorder, sun visor, and adjustable steering wheel, air horn, with 4-point support fully floating suspension and shock absorber with transverse stabilizer, air conditioner, safety belt, adjustable roof flap. |
|
| Electrics | Operating voltage: 24V, negative grounded; Starter: 24V, 5.4KW Alternator: 3-phrase, 28V, 1500W; Batteries: 2×12, 180Ah Cigar-lighter, horn, headlamp, fog light, brake lights, indicators and reverse lamp |
|
| Cargo | Steel thickness of Carriage: Floor: 12mm, Side:10mm Hydraulic Lift of Carriage: Front lift Color: red, green, white, grey, blue, yellow |
|
| Dimensions (mm) | Wheel base | 3600+1500 |
| Front wheel track | 2741 | |
| Rear wheel track | 2520 | |
| Front overhang | 1500 | |
| Rear overhang | 1000 | |
| Approach angle (o) | 32 | |
| Departure angle (o) | 40 | |
| Overall Dimension | 8300×3300×4340(mm) | |
| Cargo Internal Dimensions | 5500×3100×1800 (mm) | |
| Weight (kg) | Permissible loading capacity on chassis | 70000 |
| Dead weight | 29000 | |
| Gross vehicle weight | 70000 | |
| Front axle loading capacity | 12000 | |
| Rear axle loading capacity | 29000×2 | |
| Performance | G.V.W. (kg) | 70000 |
| Maximum driving speed (km/h) | 50 | |
| Maximum grade ability (%) | 42 | |
| Minimum ground clearance (mm) | 340 | |
| Minimum turning circle (m) | 22 | |
| Fuel consumption (L/100km) | 31 | |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}